Enviro EF5-DIAL-A-FIRE Especificações descarregar pdf (Página 16)

Installation

HEARTH MOUNT INSTALLATION:

Figure 19: Freestanding hearth mount installation overview.

Refer to Figures 18 and 19.

1. Install the hearth pad.

2. Lock the fireplace damper in the open

position.

3. Install a positive flue connector at the

fireplace dampers or seal the chimney at

the top.

4. Connect a tee to the exhaust pipe.

5. Install flexible stainless steel liner or listed

pellet vent to the top of the chimney.

Figure 18: Freestanding hearth mount installation.

Min 6" (150 mm)

Optional Hearth

or Other

Floor Protection

Combustible FloorMasonry Fireplace

10" (25.4 cm) Mantel

Minimum 8" (20 cm)

from top of stove

Damper Removed

or Fastened Open

Clean-out tee

Flue

Connector

Rain cap

Storm collar

Seal plate (cover plate)

Existing masonry flue

Vent pipe (single wall

stainless flex pipe or

solid PL vent)

Fireplace damper

location

Clean out tee

Existing fireplace

Flexible vent connector

(use this 5 foot [152cm]

section of pipe to vent

past fireplace damper or

small shelf)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comentários a estes Manuais

Sem comentários

Enviro EF5-DIAL-A-FIRE Especificações Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Enviro EF5-DIAL-A-FIRE